Three-system Three-band Timing Antenna

This antenna is a three-system three-frequency timing antenna covering GPS L1, BDS B1, and GLONASS L1. It can be used with a variety of timing modules at home and abroad to provide high-precision clock synchronization signals.

Category:

Description

  • The antenna structure is small and the installation method is flexible, which can effectively reduce the difficulty of installation by construction personnel.
  • The antenna gain is high, the pattern beam is wide, and the reception effect of low-elevation signals is good, ensuring that the satellite can be received normally in some severely obstructed occasions.
  • Designed with a lightning protection circuit, which can effectively avoid equipment damage caused by lightning strikes, especially suitable for power systems and communication systems.
  • 4. Equipped with high out-of-band suppression low-noise amplifier circuit, with strong anti-interference ability, can be used in environments with harsh electromagnetic environments, such as environments under high-voltage lines.
  • Application

    It can be widely used in communication base stations, power systems and other fields.

    Dimension

    B33A4GGB gnss antenna dimension

    Additional information

    Antenna Type

    Three-system Three-band Timing Antenna

    Part number

    B33A4GGB

    Frequency

    GPS L1
    BDS B1
    GLONASS L1

    Polarization

    Right-handed circular polarization

    Gain

    Elevation 90°≥3dBi

    Axle Ratio

    Elevation 90°≤3dB

    LNA Gain

    38±2dB

    VSWR

    <2.0

    Noise Coefficient

    <2.0

    Operating Voltage

    3.3~18VDC

    Operating Current

    ≤40mA

    Input Resistance

    50ohm

    Anti-lightning surge performance

    5KV,1.2/50US,current is not less than1.5KA

    Antenna Size

    Φ77*69mm

    Output Connector

    N-F

    Weight

    ≤200g

    Protection Level

    IP67

    Working Relative Humidity

    95%

    Working Temp.

    -40°C~+75°C

    Storage Temp.

    -55°C~+85°C